EarthBound/ASM/SRAM Routines

SRAM Routines
Game	EarthBound
Start Address	0x2F07A9
End Address	0x2F0E3C
Total Length	1684 bytes (0x0694)
Back to the ROM map

$ef05a9-$ef062f: Reset SRAM Block

Zeroes out an entire 0x500 block of SRAM and then rewrites the block signature ("HAL Laboratory, inc.", loaded from ROM at address $ef0591).

Inputs

• accumulator: SRAM block idx (0-5)

$ef0630-$ef0682: Validate SRAM Block Signature

Checks if the 0x500 block of SRAM begins with the expected block signature ("HAL Laboratory, inc.", loaded from ROM at address $ef0591). If the signature does not match the expectation, the block is reset via a call to $ef05a9.

Inputs

• accumulator: SRAM block idx (0-5)

Outputs

• accumulator: 0001 if the block was reset. Otherwise 0000.

$ef0683-$ef06a1: Validate All SRAM Block Signature

Checks all 0x500 blocks of SRAM to confirm they each begin with the expected block signature ("HAL Laboratory, inc.", loaded from ROM at address $ef0591), resetting any blocks as needed. Implemented via a trivial for loop and calls to $ef0630.

$ef06a2-$ef0733: Copy SRAM Block

Copies the entire contents of one 0x500 block of SRAM, overwriting another block. Implemented via a simple call to memcpy ($c08eed).

Inputs

• accumulator: Destination SRAM block idx (0-5)
• x: Source SRAM block idx (0-5)

$ef0734-$ef077a: Calculate SRAM Block Checksum 1

Calculates a checksum for the data contents of one 0x500 block of SRAM. (The checksum does not cover the block signature or checksums.)

Checksum 1 is calculated by adding together all bytes of the data contents.

Inputs

• accumulator: SRAM block idx (0-5)

Outputs

• accumulator: Checksum value

$ef077b-$ef07bf: Calculate SRAM Block Checksum 2

Calculates a checksum for the data contents of one 0x500 block of SRAM. (The checksum does not cover the block signature or checksums.)

Checksum 2 is calculated by XORing every 2-byte short of the data contents.

Inputs

• accumulator: SRAM block idx (0-5)

Outputs

• accumulator: Checksum value

$ef07c0-$ef0824: Validate SRAM Block Checksums

Checks if the checksums stored in one 0x500 block of SRAM are consistent with the data contents of the block. Calculates the expected checksums via calls to $ef0734 and $ef077b.

Inputs

• accumulator: SRAM block idx (0-5)

Outputs

• accumulator: 0000 on consistent checksums. ffff if inconsistent.

$ef0825-$ef088e: Validate Save Slot Checksums

Validates the checksums stored in two 0x500 blocks of SRAM, redundantly storing a single save game slot, via calls to $ef07c0. Inconsistent blocks are reset via a call to $ef05a9, and if an inconsistency is found in only one block, the good block is copied over the bad block via a call to $ef06a2.

If both blocks of the save slot fail validation, a bit flag of the save slot is merged into WRAM $7e9f79. The EarthBound main file select menu will subsequently display an error message to apologize for losing a saved game.

Inputs

• accumulator: Save slot idx (0-2)

$ef088f-$ef0a4c: Save Persistent WRAM to SRAM Block

Copies all WRAM Persistent Data to the data section of one 0x500 block of SRAM. Implemented via 3 separate calls to memcpy ($c08eed) for each of the 3 sections of persistent WRAM (general game data, the Character Stats Table, and the Flag Value Table) even though all 3 sections are contiguous in both WRAM and SRAM.

After saving data, the checksum is calculated (via $ef0734 and $ef077b) and written to the block. Both checksums are then calculated again, and if either recalculated checksum does not match the checksum in SRAM, the entire process of saving persistent WRAM to the SRAM block starts over, potentially looping forever if SRAM continues to malfunction.

Possible Bug: This scheme of calculating checksums twice seems to be for the purpose of ensuring data is correctly written to SRAM, but since EarthBound only calculates the checksums from data directly read from SRAM, not from the original WRAM data, the extra check wouldn't catch anything wrong unless a checksum itself fails to write correctly or if SRAM is malfunctioning so badly that data is changing between reads.

Inputs

• accumulator: SRAM block idx (0-5)

$ef0a4d-$ef0a67: Save Persistent WRAM to Save Slot

Copies all WRAM Persistent Data to the data section of two 0x500 blocks of SRAM, creating two redundant copies in SRAM. Implemented via calls to $ef088f.

Inputs

• accumulator: Save slot idx (0-2)

$ef0a68-$ef0b9d: Load Save Slot to Persistent WRAM

Reloads WRAM Persistent Data from the data section of a 0x500 block of SRAM. Implemented via 3 separate calls to memcpy ($c08eed) for each of the 3 sections of persistent WRAM (general game data, the Character Stats Table, and the Flag Value Table) even though all 3 sections are contiguous in both WRAM and SRAM.

Always copies from the first of two SRAM blocks redundantly storing data for the save slot without any attempt to validate the integrity of the data or consistency with the second block.

Inputs

• accumulator: Save slot idx (0-2)

$ef0c15-$ef0c3c: Copy Save Slot

This page is rather stubbly and could use some expansion. Are you a bad enough dude to rescue this article?